Powerful and versatile electric nail file with 65W power, ideal for professional manicure and pedicure. It offers speed control from 0 to 35,000 RPM. The device has an operation indicator (red LED), a switch for changing rotation direction, and the ability to switch control between handpiece and foot pedal. The ergonomic handpiece is well-balanced and equipped with a Twist-Lock system for quick attachment changes.

---

Technical Specifications

---

Package Contents

• Main unit (base) of the nail file

• Handpiece

• Power supply

• Foot pedal

• Plastic holder for handpiece

• Silicone handpiece stand

• Set of drill bits (frets) and protective caps

• User manual

---

Connecting and Starting the Device

1. Connect the handpiece to the corresponding port on the control unit.

2. If needed, connect the foot pedal to its designated slot.

3. Select the desired drill bit (fret) and insert it into the handpiece.

4. Turn the speed regulator to minimum.

5. Plug the device into the power outlet.

---

Changing Drill Bits (Frets)
WARNING: Disconnect the device from power before changing drill bits.

1. Turn the handpiece clockwise until you hear a click.

2. Remove the currently installed drill bit.

3. Insert the new bit in the same slot.

4. Turn the handpiece counterclockwise to secure it.

5. The bit is now ready for use.

---

Using the Device

1. Switch the main power to position “1”.

2. Set the control switch to hand operation; the LED will light and the bit will start rotating slowly.

3. Adjust rotation speed using the speed regulator — turn clockwise to increase.

4. If using the foot pedal, press it — the bit will rotate at the set speed.

5. Change rotation direction using the appropriate switch.

6. Always start at the lowest speed and reduce speed to minimum before changing direction.

7. If the LED does not light up, check and replace the fuse if necessary.

---

Speed and Drill Bit Recommendations

• Rotation speed may vary depending on the type or material of the bit.

• Only use recommended bits.

• Always clean the device before changing bits.

• Do not exceed the maximum speed specified for a given bit.

• Large bits may vibrate even below maximum speed — reduce speed immediately to protect the device, bit, and yourself.

---

Cleaning and Maintenance

• Disconnect the device from power before cleaning.

• Use a soft, dry cloth to wipe the casing and drill bit (remove the bit and return it to its case).

• Store the device in a cool, ventilated place.

• Never use chemical solvents or pour water directly on the device.

---

Safety

1. Only qualified cosmetic personnel should use the device.

2. Do not disassemble or use the device in unintended ways — servicing must be done by authorized personnel.

3. Do not use near liquids or with wet hands.

4. If liquid enters the device, smoke appears, strange odors occur, or the cable/casing is damaged — immediately disconnect and contact service.

5. Do not place objects on the cable or place it where it can be stepped on.

6. Disconnect the device from power after use.

7. Do not insert foreign objects into device openings — if this occurs, disconnect the device and contact service.

8. Do not place the device on unstable surfaces — drops can cause damage.

9. Leave at least one minute between turning off and restarting to extend device life.

10. Power supply must match device specifications — incorrect power may cause malfunction or fire.